o From the main screen with the network logo, press the SET key, then press
the left or right arrows to reach Setup. Press SET.
o Press the left or right arrows to reach Tuner. Press SET.
o Press the left or right arrows to reach LNBV, Press SET and turn the LNB
Voltage on.
If the front panel of your XDS receiver displays flashing ORANGE lights,
this indicates all Activation and Installation steps have not been
completed and/or your XDS receiver is not connected to the internet. All
Activation and Installation steps, including your internet connection,
must be completed or you will NOT receive the networks programming.
Your XDS receiver must ALWAYS be connected to the internet 24/7/365.
Important note: if multiple C-band satellite receivers are sharing a LNB, it
is highly recommended that an external LNB power supply be used. This
will prevent interruption of LNB power by any one of the station’s satellite
receivers rebooting, loosing power, etc.
1.2 INTERNET CONNECTION - REQUIRED
This new XDS receiver requires connection to an always-on internet pathway. The
internet pathway is used by the network to troubleshoot remotely, send audio or text
content to your receiver’s storage, send commercial playback schedules, retrieve as-
played logs of commercials inserted by the receiver, and more.
Your XDS receiver will be delivered with a 20-foot Category 5 data patch cord wired
“straight through” (not
crossover) for connection to your network’s hub or switch.
A. Connect the XDS Receiver to your network
If you elect to place your XDS receiver in your local network “inside” your
firewall, connect your network cable to one of the receiver’s LAN ports. The
receiver is set by default to obtain a dynamic IP address, also called a “DHCP
address”, from your network’s DHCP server. If there is no DHCP server or you
elect to assign a static IP address, you can do it as follows:
Assigning a Static IP address to a LAN Port:
o At the main screen with the network logo, press the SET key, then the left or
right arrow keys to reach Setup. Press SET.
o Press the left or right arrow keys to reach Network. Press SET.
Quick Start Guide, XDS PRO4-P Receiver
Rev J - June 2, 2008
Page 3 of 11
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern